View previous topic :: View next topic |
Author |
Message |
OE9DGV Novice
Joined: 21 Aug 2007 Posts: 1
|
Posted: Tue Aug 21, 2007 10:33 pm Post subject: Problems with WM 5 PDA |
|
|
Im using a HP Hx 2790 PDA with WM 5. The Installation works fine. The program starts with no problems but after terminating the MobileLog 2 the PDA works very very slow. Each touch on the screen has a delay from abt 10 seconds.. After a reset the PDA works again normaly. I have the last downloadable Version from the Home-page. With Pocket PC 2003 there is no problem. The second question: Wher has the PocketDigi.exe to be? In the same folder as the MobileLog 2?
Any proposed solutions are welcome! |
|
Back to top |
|
|
n0hr Site Admin
Joined: 05 Feb 2007 Posts: 93 Location: Iowa
|
Posted: Wed Aug 22, 2007 2:34 pm Post subject: Performance issue |
|
|
I have not had a report of this - but I have seen a performance issue on my PDA after running PocketDigi. It was quickly resolved with a soft reset.
If you see this again, could you try to go to Settings, System, Memory, Running Programs to determine if MobileLog is indeed still running?
I'm going to soon post an installer for PocketDigi 1.0.10 and rewrite the docs for interfacing MobileLog and PocketDigi. |
|
Back to top |
|
|
N1KCG Novice
Joined: 10 Dec 2007 Posts: 2
|
Posted: Mon Dec 10, 2007 4:35 pm Post subject: |
|
|
I am still having this problem myself. Somehow the pocketdigi seems to cause problems with WM5.
I tried a soft reset and I still have problems. I am going to try to do a re-install of my system to back BEFORE I installed Pocketdigi. I should be able to do that with SPRITE backup.
Lucky for me I had been using SPRITE BACKUP for a few days. |
|
Back to top |
|
|
|